E43 adhesive is a flexible, one-component, cold-curing silicone rubber that crosslinks to the moisture in the air. After bonding, it provides a good elastic bond, adheres well to a wide range of surfaces e.g. wood, metal, ceramics, tiles, leather, textiles and most plastics e.g. PVC, bakelite, Plexiglas, polystyrene. However, it does not adhere to polypropylene and polyethylene plastics, wet, dusty and greasy surfaces. Many applications e.g. glass bonding, electrical fittings, etc. Preferred adhesive for DIY and car repair.
The surface to be glued should be degreased and cleaned. The open tube must be sealed after use, as the adhesive will become leathery and set after about 30 minutes. The curing time of the applied adhesive is 24 hours. Any excess should be wiped off with a cloth before the adhesive sets.
F.BS is a flexible, one-component, cold-curing silicone rubber that crosslinks to the moisture content of the air. After bonding, it provides a good elastic bond, adheres well to a wide range of surfaces e.g. wood, metal, ceramics, tiles, leather, textiles and most plastics e.g. PVC, bakelite, Plexiglas, polystyrene. However, it does not adhere to polypropylene and polyethylene plastics, wet, dusty and greasy surfaces. Many applications e.g. glass bonding, electrical fittings, etc. Preferred adhesive for DIY and car repair.
The surface to be glued should be degreased and cleaned. The open tube must be closed after use, as the adhesive will become leathery and set after about 30 minutes. The curing time of the applied adhesive is 24 hours. Any excess should be wiped off with a cloth before the adhesive sets.